Basic 540
The Basic 540 is the most successful model of our milling and engraving devices and has proofed itself a thousand times over the years. Its delivery as assembly kit saves shipping costs and specially addresses hobbyists.
• Well covered it is protected against dirt and easy to maintain.• Driven by stepper motors via trapezoid thread spindles (Ø 12 mm, 3 mm slope)
• Plain bearing guideways on hardened and polished steel arbors (Ø 16 mm)
Technical data |
|
Positioning area (X/Y/Z) |
510 x 308 x 70 mm |
Dimensions (X/Y/Z) |
850 x 580 x 350 mm |
Positioning speed |
2000 mm/min |
Accuracy of repetition |
+/- 0.025 mm |
max. reverse error |
< 0.05 mm |
max. positioning error |
< 0.1 mm /100 mm |
Weight |
20 kg |
The tools (router, plotting knife and so on) are not included.
STEP-FOUR Basic 540
Fact-sheet of STEP-FOUR Basic 540. STEP-FOUR milling units comply with the highest safety standards and are CE - certified.
|
||
|
||